Adding Voice Mail To A Conference; Connecting Two Outside Lines - Toshiba DKT2204-CT User Manual

Handset Operation

Adding Voice Mail to a Conference

Adding Voice Mail to a Conference
The Conference Master can add voice mail to a conference. This enables participants
in a conference to listen to or leave a voice mail message during a telephone call.
➤
To add Voice Mail to a conference call (performed by Conference Master)
1. Press
2. Dial the voice mail (VM) extension number, then enter the VM mailbox and
security code. This adds the voice mailbox to the conference.
3. Press
conference members by pressing
Now, all parties in the conference can listen to or record a message to this voice
mailbox. Only the Master can control the VM with touchtones or Soft Keys.

Connecting Two Outside Lines

1. While talking on an outside call, press
2. Dial an outside line access code and outside telephone number.
3. After the party answers, press
If you receive a busy tone or if the station does not answer, press
4. Hang up. The two lines are connected.
5. To supervise a tandem call, press
if the parties are still talking, press
and the connection is released.
If your telephone company provides auto disconnect, the connection may release
automatically when the parties hang up. If not, the lines must be supervised to be
disconnected.
34
to place the current call on Consultation Hold.
to reconnect to the original party. (You can continue to add
Strata CTX DKT2204-CT/DKT2304-CT Cordless Digital Telephones 06/03
and dialing another extension.)
. You hear dial tone.
. All parties are conferenced.
. If the parties have finished, hang up or
and hang-up. Both Line LEDs turn off
.