Custom Audio Electronics Mini PLUS User Manual page 30

3. PRINTER FUNCTIONS
[Default]
[Reference]
[Example]
$ 1 D $ 5 5
[Name] Resets the printer parameters to default.
[Format] ASCII
Hex
Decimal
[Description] Resets the printer parameters to the default configuration.
[Notes] • After executing this command the printer is initialized.
[Default]
[Reference]
[Example]
$ 1 D $ 5 7 n d 1 . . d . n
[Name] Prints n byte of a 200 dpi graphic line
[Format] ASCII
Hex
Decimal
[Range] 1 n 48
0 d1 ... dn 255
[Description] Print n byte of a 200 dpi graphic line where :
• n specifies the number of byte to print;
• d1...dn specify the bytes to print.
[Notes] • If the bit image data input exceeds the number of dots to be printed on a line, the
excess data are processed as printable characters.
• d indicates the bit image data. Set a corresponding bit to 1 to print a dot, or to 0 to not
print the dot.
• This command is not affected by the emphasized, double-strike, underline (etc.) print
modes and the upside-down mode.
[Default]
[Reference]
[Example] For printing 12 bytes the command sequence is :
$1D $57 $0C $FF $00 $FF $00 $FF $00 $FF $00 $FF $00 $FF $00
GS U
1D 55
29 85
GS W n
1D 57 n
29 87 n
3-13
d1... dn
d1... dn
d1... dn
Mini PLUS