Falcon 110 Induction User's Manual & Installation Instructions page 23

Locate the bulb cover and unscrew it by turning it anti-
clockwise - it may be very stiff (Fig.6-2).
Taking care to protect your fingers with a glove in case
the bulb should shatter, unscrew the old bulb.
Screw in the new bulb clockwise and then screw the
bulb cover back on. Turn on the electricity supply and
check that the bulb now lights.
The oven door is misaligned
The bottom hinge of either oven door can be adjusted
to alter the angle of the door (Fig.6-3). Loosen the
bottom hinge fixing screws and use the notch and a flat
bladed screwdriver to move the position of the hinge to
set the hinge position (Fig.6-4).
Retighten the hinge screws.
ArtNo.320-0006 Oven door hinge adjustment 1
Effect of hinge adjustment - exagerrated for clarity
ArtNo.320-0007 Oven door hinge adjustment 2
Oven door omitted for clarity
21
Centreline of hinge pin
Fig.6-3
Fig.6-4