Yamaha RX10RX Owner's Manual page 82

Troubleshooting
To start the engine using the booster battery
1. Apply the parking brake and turn the
main switch to the off position.
2. Remove the shroud and the right side
cover. (See page 45 for removal proce-
dures.)
3. Remove the red (+) connecting lead from
the lead holder and move it away from
the black (–) connecting lead.
ECS00660
CAUTION:
Be sure to connect the red (+) jumper ca-
ble to the red (+) connecting lead and the
black (–) jumper cable to the black (–) con-
necting lead. Do not reverse the connec-
tions.
4. Pull the red (+) connecting lead cover to
expose the terminal through the slit in the
cover, and then connect the red (+) jump-
er cable to the red (+) connecting lead.
76
5. Connect the other end of the red (+)
jumper cable to the positive (+) terminal
of the booster battery.
6. Connect the black (–) jumper cable to the
negative (–) terminal of the booster bat-
tery.
7. Pull the black (–) connecting lead cover
to expose the terminal through the slit in
the cover, and then connect the black (–)
jumper cable to the black (–) connecting
lead.