Table of Contents
Advertisement
Control functions
3. Tighten the locknut while holding the con-
trol rod adjusting nut in place.
Locknut tightening torque:
25 Nm (2.5 m·kgf, 18 ft·lb)
ECS00310
CAUTION:
• When using the two wrenches included
in the owner's tool kit, make sure that
they are situated at a right angle to the
control rod as shown, and that they are
tightly fitted to the locknut and the con-
trol rod adjusting nut.
• The left and right adjusting nuts must be
set to the same position. Uneven set-
tings can cause poor handling and loss
of stability.
30
Advertisement
Table of Contents
