Table of Contents
Advertisement
Control functions
ESU10590
Shift lever (RX10R / RX10RTR /
RX10MT / RX10LT)
The shift lever is used to put the snowmobile
into forward or reverse. After coming to a
complete stop, pull the shift lever out, slide it
to "FWD" or to "REV" until it stops, and then
release it.
1. Shift lever
1 . Pull out.
2. Slide to "FWD" (forward).
3. Release.
20
1 . Pull out.
2. Slide to "REV" (reverse).
3. Release.
ECS00070
CAUTION:
Do not shift from "FWD" to "REV" or from
"REV" to "FWD" while the snowmobile is
moving. Otherwise, the drive system
could be damaged.
ESU12530
Rear suspension damping
force remote adjustment dial
(RX10R / RX10LT)
Turn the remote adjustment dial to adjust the
rear suspension damping force. (See page 27
for adjustment procedures.)
1 . Rear suspension damping force remote ad-
justment dial
Advertisement
Table of Contents
