Parking Brake Lever - Yamaha RX10RX Owner's Manual

Control functions
3. Tighten the locknut securely after adjust-
ing the brake lever.
ESU10580
Parking brake lever
When parking the snowmobile or starting the
engine, apply the parking brake by moving the
parking brake lever to the left.
1 . Brake lever
NOTE:
When the brake lever is operated, the brake
light will illuminate.
ECS00060
CAUTION:
Make sure that the brake lever end does
not project out over the handlebar end.
This will help prevent brake lever damage
when the snowmobile is placed on its side
for service.
1 . Parking brake lever
To release the parking brake, move the park-
ing brake lever to the right.
The brake lever is equipped with a position
adjuster.
To adjust the brake lever position:
1. Loosen the locknut.
2. While lightly pushing the brake lever in di-
rection (a), finger tighten the adjusting
bolt to set the brake lever to the desired
position.
EWS00060
• Always set the parking brake before at-
tempting to start the engine.
• Never run the snowmobile with the park-
ing brake applied. This may overheat the
brake disc and reduce braking ability.
1 . Locknut
2. Adjusting bolt
19