Table of Contents
Advertisement
ESU11740
Tool kit
The owner's tool kit has the tools which are
sufficient for most periodic maintenance and
minor repairs. A torque wrench is also neces-
sary to properly tighten nuts and bolts.
1. Tool kit
ECS00360
CAUTION:
Before starting the engine, make sure that
the tool kit is properly seated in its holder
and is securely fastened.
NOTE:
If you do not have a torque wrench available
during a service operation requiring one, take
your snowmobile to a Yamaha dealer to
check the torque settings and adjust them if
necessary.
ESU11750
Removing and installing the
shroud and covers
Shroud
To remove the shroud
Loosen the fasteners, slowly raise the shroud,
and then unhook the shroud from the shroud
stay.
Periodic maintenance
1. Fastener
1. Shroud
To install the shroud
Hook the end of the shroud onto the shroud
stay, slowly lower it to the original position,
and then tighten the fasteners.
1. Shroud stay
Left and right side covers
To remove a side cover
Loosen the fasteners, and then remove the
side cover.
45
Advertisement
Table of Contents
