Replacing A Turn Signal Light Bulb - Yamaha XT250 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
1
2
3
1. Tail/brake light bulb
4
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
5
4. Install the lens by installing the
screws.
6
CAUTION:
7
Do not overtighten the screws, oth-
erwise the lens may break.
8
9
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
1
by removing the screw.
2
1. Turn signal light lens
2. Screw
ECA10680
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
EAU24202
1
1. Turn signal light bulb
CAUTION:
Do not overtighten the screw, other-
wise the lens may break.
6-36
1
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw.
ECA11190