Multi-Function Display; Clock Mode - Yamaha XT250 Owner's Manual

Multi-function display

WARNING
Be sure to stop the vehicle before
making any setting changes to the
multi-function display.
1 2
1. "SELECT" button
2. "RESET" button
3. Clock
4. Speedometer
INSTRUMENT AND CONTROL FUNCTIONS
EAU44861
1
EWA12311
3 4
1. Odometer/tripmeter (bottom)
2. Tripmeter (top)
The multi-function display is equipped
with the following:
G
a speedometer (which shows the
riding speed)
G
an odometer (which shows the to-
tal distance traveled)
G two tripmeters (which show the
distance traveled since they were
last set to zero)
G
a clock
NOTE:
G
Be sure to turn the key to "ON" be-
fore using the "SELECT" and "RE-
SET" buttons.
G
When the key is turned to "ON", all
of the display segments of the
2
G
Odometer, clock and tripmeter
modes
Pushing the "SELECT" button switches
the display between the odometer
mode "ODO" and the tripmeter modes
"TRIP" in the following order:
ODO → TRIP (top) → TRIP (bottom) →
ODO
To reset a tripmeter, select it by push-
ing the "SELECT" button until "TRIP"
begins flashing ("TRIP" will only flash
for five seconds). While "TRIP" is flash-
ing, push the "RESET" button for at
least one second.

Clock mode

To set the clock:
1. Push the "SELECT" button and
3-3
multi-function display will appear
one after the other and then disap-
pear, in order to test the electrical
circuit.
To switch the speedometer and
odometer/tripmeter displays be-
tween miles and kilometers, press
the "SELECT" button for at least
two seconds.
2
3
4
5
6
7
8
9