Cleaning And Lubricating The Drive Chain - Yamaha XT250 Owner's Manual

1
(a)
2
1. Drive chain slack adjusting plate
2. Stopper
3. Axle nut
CAUTION:
Improper drive chain slack will over-
load the engine as well as other vital
parts of the motorcycle and can lead
to chain slippage or breakage. To
prevent this from occurring, keep
the drive chain slack within the
specified limits.
3. Tighten the axle nut to the speci-
fied torque.
Tightening torque:
Axle nut:
85 Nm (8.5 m·kgf, 61.5 ft·lbf)
PERIODIC MAINTENANCE AND MINOR REPAIR
Cleaning and lubricating the
drive chain
The drive chain must be cleaned and
lubricated at the intervals specified in
3
the periodic maintenance and lubrica-
tion chart, otherwise it will quickly wear
(b)
out, especially when riding in dusty or
wet areas. Service the drive chain as
follows.
CAUTION:
The drive chain must be lubricated
after washing the motorcycle and
ECA10570
riding in the rain.
1. Clean the drive chain with kero-
sene and a small soft brush.
CAUTION:
To prevent damaging the O-rings, do
not clean the drive chain with steam
cleaners, high-pressure washers or
inappropriate solvents.
2. Wipe the drive chain dry.
3. Thoroughly lubricate the drive
chain with a special O-ring chain
lubricant.
EAU23022
CAUTION:
Do not use engine oil or any other lu-
bricants for the drive chain, as they
may contain substances that could
damage the O-rings.
ECA10581
ECA11120
6-27
ECA11110
2
3
4
5
6
7
8
9