Replacing The Tail/Brake Light Bulb - Yamaha XT250 Owner's Manual

1
1. Headlight bulb holder
WARNING
Headlight bulbs get very hot. There-
fore, keep flammable products away
from a lit headlight bulb, and do not
touch the bulb until it has cooled
down.
5. Place a new bulb into position, and
then secure it with the bulb holder.
CAUTION:
Do not touch the glass part of the
headlight bulb to keep it free from
oil, otherwise the transparency of
the glass, the luminosity of the bulb,
and the bulb life will be adversely af-
fected. Thoroughly clean off any dirt
PERIODIC MAINTENANCE AND MINOR REPAIR
and fingerprints on the headlight
bulb using a cloth moistened with al-
cohol or thinner.
EWA10790
1. Do not touch the glass part of the bulb.
6. Install the bulb cover, and then
connect the coupler.
7. Place the headlight unit in the orig-
inal position, and then install the
bolts.
8. Install the cowling.
ECA10660
9. Have a Yamaha dealer adjust the
headlight beam if necessary.
Replacing the tail/brake light
bulb
1. Tail/brake light lens
2. Screw
6-35
1. Remove the tail/brake light lens by
removing the screws.
1
2
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
EAU24131
2
3
4
5
6
7
8
9