Set Audible Message Alert - VTech VT 9171 Manual

4. Press SET to set the day of system clock. The current "hour" will be an-
nounced then.
5. Press SELECT to change the hour setting.
6. Press SET to set the hour of the system clock. The current "minute" will be
announced then.
7. Press SELECT to change the minute setting. Press and hold the SELECT to
increase the value by ten.
8. Press SET to set the minute of the system clock. The whole system day &
time will be announced to confirm your setting.

Set Audible Message Alert

If you want your system to beep once every 10s to notify you when new messages
have been received, set the Audible Message Alert to on. Otherwise, it is preset to
off.
To change the day and time:
1. Press MENU until you hear "Set day
and time".
2. Press SET now will announce the cur-
rent day and time.
3. Press SELECT to change the setting.
The current "day" will be announced
at first time you press SELECT.
To change the settings:
1. Press MENU until you hear "Set Au-
dible Message Alert".
36
NOTE : If the user touches any of the following base keys: TIME/SET, SELECT,
MENU, ERASE, REC/MEMO, REPEAT, SKIP, ANSWER, MAILBOX 1,2,3, VOL+,
VOL- while there is new messages and the alert is on, the ITAD will stop the
periodic alert. There will be message alert again if new messages are received.
This provides a convenient way to disable the alert. Also, when the base is in
speakerphone mode, the alert will also be disabled temporally.
Set Announce-only
The answering machine can be set to announce-only, i.e. the ITAD just announces
the announcement only OGM and does not allow the caller to leave any mes-
sages.
2. Press SET now will announce the cur-
rent setting.
3. Press SELECT to toggle the choices
(on or off). The previous setting will be
announced at the first time you press
the key.
4. Press SET to set your choice. Voice
prompt of "Audible Message Alert is
On" or "Audible Message Alert is Off"
will be announced to confirm your set-
ting.
To set the selection:
1. Press MENU until "Set announce-only"
is announced.
2. Press SET now will announce the cur-
rent setting.
37