Day And Time; Set Audible Message - VTech vt2461 User Manual

Day and Time

During initial setup, or after a power failure, the day and time default is set
to Monday, 12:00am. The display will flash "CL" to indicate day and time need
to be set.
Set Audible Message Alert
If you want your Answering System to beep once every 10 seconds to notify
you when new messages have been received, set Audible Message Alert to ON.
Otherwise, it is preset to OFF.
Answering System Setup
1.
Press MENU unit you hear, "Set
day and time."
2.
Press SELECT until the correct
day is announced.
3.
Press TIME/SET to confirm your
choice.
4.
Press SELECT until the correct
hour is announced.
5.
Press TIME/SET to confirm your
choice.
6.
Press SELECT until the correct
minute is announced. Holding
the key continuously will
increase the minutes by 10
minute steps.
7.
Press TIME/SET to confirm your
choice. You will hear an
announcement of the day and
time.
1.
Press MENU until you hear "Set
Audible Message Alert."
2.
Press SELECT until the desired
s e t t i n g , ( O N o r O F F ) i s
announced.
3.
Press TIME/SET to confirm your
choice. The voice prompt of
"Audible Message Alert On" or
"Audible Message Alert Off" will
be heard.
32