Changing Each Setting In 2 Pulse Mode - Toshiba IK-TU61 Instruction Manual

（ （ （ （ 1． ． ． ． 4． ． ． ． 3） ） ） ） Changing each setting in 2PULSE mode
Move up and down
By pushing
MENU UP,DOWN
-- 1 SHUTTER -- <FILE A>
MODE
EXT TRIG
TRIG PULSE
FLD FRM
< MODE = EXT TRIG EXT TRIG = 2PULSE>
(a) Changing inputting trigger pulse setting
① Set the "→" to TRIG PULSE by pushing [MENU UP], [MENU DOWN] buttons.
② Select either
* This setting is only valid in the 2PULSE mode. To make the trigger pulse setting when using the
1PULSE mode, first set the EXT TRIG mode to 1PULSE SNR or 1PULSE SR, then make the settings
with the TRIG PULSE items.
(b) Changing the CCD storage mode
① Set the "→" to FLD/FRM by pushing [MENU UP], [MENU DOWN] buttons.
② Select either FLD (field) or FRM (frame) by pushing [DATA UP], [DATA DOWN] buttons.
Note:
The longer the storage time with extended exposures, the more visible certain characteristics of CCD
cameras become: fixed pattern noise, white pixels, etc.
Set by pushing
DATA UP,DOWN
EXT TRIG
2PULSE
FLD
, or
Shutter mode AUTO, MANUAL, SS, EXT TRIG
EXT TRIG mode
1PULSE SNR, 1PULSE SR, 2PULSE, RS232C
Input trigger pulse setting at 2PULSE
The rising edge
The falling edge
ront and back edges of pulse
F
FLD/FRM SW FLD, FRM
by pushing [DATA UP], [DATA DOWN] buttons.
- 26 -