Changing The Gamma Correction On/Off; Changing Gamma Correction Level - Toshiba IK-TU61 Instruction Manual

（ （ （ （ 4） ） ） ） PROCESS
Move up and down
By pushing
MENU UP,DOWN
-- 4 PROCESS --
GAMMA ON/OFF
GAMMA
BLACK GAMMA
DTL GAIN
DTL B FRQ
M PED
CHROMA GAIN
DNR
（ （ （ （ 4． ． ． ． 1） ） ） ） Changing the gamma correction ON/OFF
① Set the "→" to GAMMA ON/OFF by pushing [MENU UP], [MENU DOWN] buttons.
② Select either ON or OFF by pushing [DATA UP], [DATA DOWN] buttons.
When ON is selected, menu will show the GAMMA and BLACK GAMMA selections.
selected, GAMMA and BLACK GAMMA disappear. So the setting for GAMMA and BLACK GAMMA
cannot be made.
Move up and down
By pushing
MENU UP,DOWN
-- 4 PROCESS --
GAMMA ON/OFF
DTL GAIN
DTL B FRQ
M PED
CHROMA GAIN
DNR
Menu when GAMMA OFF is selected.
（ （ （ （ 4． ． ． ． 2） ） ） ） Changing gamma correction level
① Set the "→" to GAMMA by pushing [MENU UP], [MENU DOWN] buttons.
② Set the gamma correction level by pushing [DATA UP], [DATA DOWN] buttons.
Correction amount becomes smaller.
* When OFF is selected in GAMMA ON/OFF selection line, the display GAMMA turns off automatically.
So the gamma correction level change cannot be changed.
Set by pushing
DATA UP,DOWN
<FILE A>
ON
0
NORMAL
0
NORMAL
0
0
OFF
Set by pushing
DATA UP,DOWN
<FILE A>
OFF
0
NORMAL
0
0
OFF
［DATA UP］
－10
0
Gamma correction ON, OFF
Gamma correction level setting -10 to 10
Black level gamma LOW, NORMAL, HIGH
Detail gain setting -7 to 7
Detail boost frequency setting LOW, NORMAL, HIGH
Master pedestal setting -50 to 50
Chroma gain setting -128 to 127
Digital noise reduction ON,OFF
Gamma correction ON, OFF
Detail gain setting -7 to 7
Detail boost frequency setting LOW, NORMAL, HIGH
Master pedestal setting -50 to 50
Chroma gain setting -128 to 127
Digital noise reduction ON,OFF
Correction amount becomes larger.
10
［DATA DOWN］
- 32 -
When OFF is