(1. 3) Changing The Setting In; E.trg Mode; (1. 3. 1) Changing The Setting In 1P Snr Mode - Toshiba IK-TF7U Instruction Manual

(1. 3) Changing the setting in E.TRG mode
The E.TRG has five modes; 1P SNR, 1P SR, PW SNR, PW SR, RR.
First move the " " to MODE and select E. TRG, then move the " " to E.TRG and select the desired E.TRG
mode.

(1. 3. 1) Changing the setting in 1P SNR mode

Move up down
by pushing
MENU UP, DOWN
-- SHUTTER --
MODE
E.TRG
TRG.P
EXP.
PART
<MODE = E.TRG E.TRG = 1P SNR>
(a) Changing the polarity of inputting trigger pulse setting
1 Move the " " to TRG.P by pushing [MENU UP], [MENU DOWN] buttons.
2 Select either
(b) Changing 1P SNR exposure time setting
1 Move the " " to EXP. by pushing [MENU UP], [MENU DOWN] buttons.
2 Select the exposure time by pushing [DATA UP], [DATA DOWN] buttons.
(c) Changing the partial scanning setting
1 Move the " " to PART by pushing [MENU UP], [MENU DOWN] buttons.
2 Select the mode by pushing [DATA UP], [DATA DOWN] buttons.
16
Select the desired
value by pushing
DATA UP, DOWN
E.TRG
1P SNR
30ms
OFF
, by pushing [DATA UP], [DATA DOWN] buttons.
• Sutter mode MANU, SS, E.TRG

• E.TRG mode

1P SNR, 1P SR, PW SNR, PW SR, RR
• Input trigger pulse setting at 1P SNR and 1P SR
Input trigger pulse : positive polarity
Input trigger pulse : negative polarity
• Exposure time setting at 1P SNR and 1P SR
0.01 ms 0.02 ms
0.01 ms 0.02 ms
step step
• Partial scanning switch
OFF/40fps/50fps/60fps/70fps/80fps/90fps/
E40fps/E50fps/E60fps/E70fps/E80fps/E90fps
0.4 ms 1 ms 20 ms
0.1 ms 1 ms 2 ms
step step step
30 ms