Table of Contents
Advertisement
① Camera cable terminal
② POWER LED
③ POWER switch
④ FILE button
⑤ FREEZE button
⑥ DISP button
⑦ PAGE button
⑧ MENU UP（SHD）button
⑨ MENU DOWN button
⑩ DATA UP（AWB）button
⑪ DATA DOWN
（ABB）button
⑫ DC IN 12V terminal
⑬ DC IN／SYNC terminal
⑭ S－VIDEO terminal
⑮ EXT. SYNC terminal
⑯ VIDEO terminal
⑰ DIGITAL terminal
⑱ KEY LOCK switch
⑲ RGB terminal
The camera cable is connected.
Lights when the power is turned on.
Turns on or off the power supply.
Used when switching the scene files.
Used when switching to the freeze menu and when returning from the freeze
menu to the camera menu.
Used when switching the display.
Used when switching to the menu and when selecting the menus.
Select the function to be confirmed or changed on the menu. (Also used when
performing the auto shading correction.)
Select the function to be confirmed or changed on the menu.
Changes the value of the function selected by the MENU (UP/DOWN) button.
(Also used when using AWB.)
Changes the value of the function selected by the MENU (UP/DOWN) button.
(Also used when using ABB.)
Accept a DC power input (12V).
HD and VD signals are input/output. When the random trigger operation is
used, the trigger signal is input and the index signal is output.
Outputs Y (luminance) and C (color) signals.
Used when the camera output signal is synchronized by the external signal.
(BNC connector)
Outputs VBS output. Connected to a monitor, VTR, etc. (BNC connector)
LVDS format digital video signal output and control signal input/output
terminal. This terminal also includes an RS232C format external control pin.
Enables/disables buttons ④ to ⑪.
Used as the connector terminal for Y/C or VBS output, RGB or Y/P
and SYNC output.
- 9 -
/P
output,
R
B
Advertisement
Table of Contents
