Jumper Settings Of Ada-16Fx-Ethernet - Fujitsu ADA-16FX User Manual

3.1 Jumper settings of ADA-16FX-ETHERNET

The following jumper settings are set by default:
Jumper
JP1
JP2
JP3
JP4 Select center tap A of Ethernet jack
JP5 Select center tap B of Ethernet jack
Please refer to the documentation of the evaluation board for detailed information about the
jumper settings for the SK-16FX-EUROSCOPE (SK-16FX-100PMC).
© Fujitsu Microelectronics Europe GmbH
ADA-16FX-ETHERNET
Chapter 3 Installation
Description / Function
Use chip select line 2
Use chip select line 3
Use chip select line 4
- 7 -
Type Default
solder JP 2pol. Closed
solder JP 2pol. Open
solder JP 2pol. Open
solder JP 3pol. 1-2
solder JP 3pol. 1-2
UG-960011-11