Deleting Measured Values - HMM smartLAB profi User Manual

• By pressing "On/Off START" once more, you can display the
average values of your measurements taken in the afternoon/
evening. This will be indicated by a little moon symbol on the
display (see pict. 8 c)
• By pressing "On/Off START" once more, the average value of all
stored measurements will be displayed. (see pict. 8d) This is also
indicated by the letter "A" below "AVG" on the display.
• You can exit memory mode at any time, by pressing "On/Off
START" longer than 3 seconds. The monitor will then power off.

Deleting measured values

• Press both left and right arrow keys together longer than 3
seconds. The display will show the currently set user profile and
the message "dEL All" (see pict. 9).
24
pict. 8c pict. 8d
pict. 9