Setup & Operating Functions; Making The Device Ready For Operation - HMM smartLAB profi User Manual

III. Setup & operating functions

Making the device ready for operation

• Please open the cover of the battery case on the back side of the
device.
• Please insert the „AAA" batteries according to the required
polarity.
• Then close the cover of the battery case.
When the display shows the symbol for
low batteries
all (see picture 1).
Please do not use rechargeable
batteries for this device.
When you do not use the device for one month or more
please remove the batteries in order to prevent them
from discharging automatically.
Measurement device, batteries and arm cuff have to be
disposed of according to the local regulation.
please change them
pict. 1
11