Body Posture During Measurement - HMM smartLAB profi User Manual

Note:
• Use the same arm for each time you measure.
• Do not move your arm, body or the monitor and do not move t h e
rubber tube during measurement
• Stay quiet and calm for 5 minutes before blood pressure
measurement
• If the cuff becomes dirty, remove it from the monitor and clear
it by hand in a mild detergent, then rinse it thoroughly in cold
water. Never dry the cuff in clothes dryer or iron it.

Body posture during measurement

Sitting Measurement – Recommended Position
• Sit upright
• Place palm upside in front of you on a flat
surface such as a desk or table, with your
elbow resting on a chair or table.
• The cuff should be at the same level as
your heart.
• Place your arm on the monitor's plastic case as shown in the
picture, to aid maintaining a correct and still arm position.
Lying Down Measurement
• Lie on your back.
• Place your arm straight along your side
with your palm upside.
• The cuff should be placed at the same level
as your heart
• In case you move your arm and the monitor
is not able to measure correctly, the symbol
display.
20
appears on the