Setting time, date and average
Setting date and time from your device is important for using
storage or transfering results onto your computer.
The smartLAB
profi+ blood pressure meter uses a special function
®
to automatically set usersettings and function setup. A receiving
device (z.B. HMM h
h
) that supports this function
Fon®
Fon®
oder
Collect
is required.
The advantage of this automatic function is that you don't have to
setup the device manually. When there is a receiving device, after
first-use or changing batteries, date, time and usersettings will be
set automatically in less then 4 minutes.
Now, data will be requested every hour. Information about batte-
rie status also is attached. So the receiving device receives battery
status and Information, if the device is in range. All this makes it
possible for the service-provider to offer a better service.
Please press the left arrow key more than 3 seconds to set date
and time. The mode starts now with the current year that you
have to choose by the arrow keys. Press button „On/Off START"
to confirm.
pict. 2
12