Setting Up The Wireless Data Transfer - HMM smartLAB profi User Manual

Finally set the minutes in the same way (use the arrow keys and con-
firm your choice with the button „On/Off START").
After that you can choose (3,4 or 5 measurements) the average of your
measured values. Please use the arrow keys for your choice (pict. 2d)
and confirm with the button „On/Off START". Your smartLAB
® profi+
will then calculate the average results, based on your settings.
pict. 2c pict. 2d
Then the device starts again with the current year. You can stop the
setting by using the button „On/Off START" for more than 3 seconds.

Setting up the wireless data transfer

Your smartLAB
profi+ blood pressure monitor has an integrated ANT+
®
module. It enables you to transmit your measured values to your
personal computer, your laptop or your mobile phone (e.g. our HMM
h ). After that you can store, analyze and process your data with
Fon*
the correspondent software.
What does ANT mean?
ANT is a wireless transmission standard for your measured values. You
need a module for your transmitter as well as for your receiver to use
this technology.
14