Measurement - HMM smartLAB profi User Manual

Measurement

• After having applied the cuff, seat yourself comfortably and press
the "On/Off START" button. A signal tone appears and all display
symbols will be shown (see pict. 7)
• After that, the last stored result with the correspondent user "A"
or "B" (see pict. 7a) will be displayed. You can switch the user
profile by using the user profile button on the side of the device.
• Then, the monitor will start with the measurement by inflating the
cuff. (see pict. 7b)
• After the measurement, the air will slowly be released from the
cuff. Your blood pressure value and pulse frequency will be shown
on the display. Irregular heartbeats will also be shown by the
correspondent symbol
display side you can see how your values are according to the WHO
scheme (see. pict. 7c). The result will be saved automatically.
pict. 7 pict. 7a
, if they occure. On the left and right
21