Displaying Stored Values - HMM smartLAB profi User Manual

• smartLAB
can manually shut down the monitor by pressing "On/Off START"
after the measurement.
• You can interrupt the measurement by pressing "On/Off START".
The cuff will then release air and the monitor will turn off.

Displaying stored values

• Press "MEM" longer than 3 seconds, to enter the memory mode.
The correspondant symbol
mode.
• Press the right arrow key "MEM" longer than 3 seconds. The last
measured value will be shown on the display (see pict. 8). Use
the arrow keys to scroll through the results, from the most recent
to past results. Each result is displayed with measurement date
and time, as well as the Bi-classification scale (according to WHO
scheme)
22
pict. 7b
® profi+ will automatically turn off after 1 minute. You
pict. 7c
indicates that you are in memory