Copying Products To Other Types Of Control Units - Velux GGL INTEGRA Directions For Use Manual

Copying products to other types of control units

You can copy one or more products registered
in the remote control to another type of VELUX
®
or io-homecontrol control unit. This other type of
control unit can thus operate both its own and the
copied products.
The example shows how to copy a roller shutter
from a two-way VELUX remote control A to a one-
way VELUX remote control B.
Note: A one-way VELUX remote control can
operate products of the same type only, eg roller
shutters.
Steps 1 and 2 must be completed within
10 minutes, so please read items 1-8 before
proceeding.
Step 1: Remote control A
1
Press "Menu".
2
Scroll through the menus:
Settings System settings
3
Press to highlight "Configure".
Press "Enter" to confirm your choice.
46
4
Press
copied to another type of control unit (B).
A B
5
Locate the product, see section Locating and
2
1
operating a product.
6
Displays the relevant product.
Press
7
The display shows that the product is ready for
being copied to another type of control unit (B).
House
No. 1
Window
Step 2: Control unit B
Menu Locate
8
Press the RESET button at the back briefly (max
5 seconds) to register the new product. The prod-
--- SYSTEM SETTINGS --
uct chosen can now be operated by control unit B.
Register product
Copy system
Security key
Configure
Note: For other types of io-homecontrol
Enter Back
units, please refer to the instructions provided with
P1 P2
the product in question to execute step 2.
"Enter" to choose the product(s) to be
"Enter" to confirm your choice.
®
-- INFORMATION --
Choose products to
be configured
Enter Back
House
No. 3
Roller shutter
Enter Back
-- INFORMATION --
Product ready for
configuration
control
47