Timer - Velux GGL INTEGRA Directions For Use Manual

Timer

With the timer you can for example close a win-
dow, roll down a sunscreening product or turn off
frame lights after a pre-set time interval.
The example shows how to set window No. 1 in
Room 1 to close after 1 hour and 10 minutes.
1 Press "Menu".
2
Press to highlight "Timer".
Press "Enter" to confirm your choice.
3
Press to highlight "Set timer".
Press "Enter" to confirm your choice.
4 Locate the window, see section Locating and oper-
ating a product.
5
The display shows the relevant product. The indi-
vidual products can be identified by pressing
for a short period of time.
Press "Enter" to proceed.
30
6
Press
window when activated via the timer.
100% corresponds to fully open.
Press
House
No. 1
Window
7
Press
Menu Back
when deactivated via the timer. 0% corresponds
to fully closed.
Press
--- MENU ---
Keypad lock
Timer
Settings
Enter Back
8
Press
P1 P2
First choose minutes.
Press
-- TIMER --
Set timer
Delete timer
Enter Back
9
Press
P1 P2
to close after 1 hour and 10 minutes.
Press
10
The display shows that the timer has been acti-
vated.
Window No. 1 in Room 1 now closes after 1 hour
Room 1
--- WINDOW ---
and 10 minutes.
No. 1
Note: The timer can be interrupted by choosing
Enter Back
"Delete timer" in item 3.
to set the desired start position of the
"Enter" to confirm the setting.
to set the stop position of the window
"Enter" to confirm the setting.
to choose the time period required.
"Enter" to change to hours.
to choose hours. The window is now set
"Enter" to confirm the setting.
-- SET TIMER --
Start position
100%
Enter Back
P1 P2
--- SET TIMER ---
Stop position
0%
Enter Back
P1 P2
--- SET TIMER ---
Time period
00 h 10 min
Enter Back
P1 P2
--- SET TIMER ---
Time period
01 h 10min
Enter Back
P1
P2
Room 1
No. 1
Window
Menu Locate
31