Registering A New Product - Velux GGL INTEGRA Directions For Use Manual

Registering a new product

When a new product has been installed, it can be
registered in a remote control already in opera-
tion. This new product can be a new INTEGRA
roof window, a blind, a roller shutter etc.
The example shows how to register a new roller
shutter in the remote control and place it in Room 1.
The registration must be completed within
10 minutes, so please read items 1-9 before
proceeding.
1
Switch on mains power to the window with electri-
cal products. If this has already been done, switch
power off and then back on again.
2
Press "Menu".
3
Scroll through the menus:
Settings System settings
4
Press to highlight "Register product".
Press "Enter" to confirm your choice.
5
Automatic registration is running.
38
6
The display shows that the new product has been
registered.
Now the product must be placed.
7a If no Rooms have been created, the product is
automatically placed in House.
Operation can start.
7b If Rooms have been created, the product has to
be placed in the appropriate Room.
House
The display shows a list of new products. In case
No. 1
of more new products, the individual products
Window
can be identified by pressing
Menu Locate
period of time.
Press
P1 P2
Press
--- SYSTEM SETTINGS ---
8
Displays a list of the Rooms created.
Register product
Copy system
Press
Security key
Configure
uct is to be placed.
Enter Back
Press
P1 P2
--- AUTO SET-UP ---
9
The display shows that the Room has been modi-
fied.
Operation can start.
for a short
to highlight the product to be placed.
"Enter" to confirm your choice.
to highlight the Room in which the prod-
"Enter" to confirm your choice.
--- INFORMATION ---
New products
registered
House
No. 1
Roller shutter
Menu Locate
P1
P2
New products
--- ROLLER SHUTTER ---
No. 1 new
Enter
P1 P2
--- PLACE IN ---
Room 1
Room 2
New Room
Enter Back
P1 P2
--- INFORMATION ---
Room modified
39