Access Code; Keypad Lock - Velux GGL INTEGRA Directions For Use Manual

Access code

You can choose a personal access code to protect
the settings under the menu item Settings. The
access code must consist of four digits from 0 to 9.
1
Press "Menu".
2
Scroll through the menus:
Settings User settings
3
Press to highlight "Choose/Change".
Press "Enter" to confirm your choice.
4
Press to choose the first digit.
Press "Enter" to go to the next digit.
Press "Enter" when the last digit has been
chosen.
5
Press "Save" to confirm and save the code.
Every time you now choose Settings in the menu,
you must enter the access code before you can
proceed.
Note: The access code can be cancelled by
choosing "Delete" in item 3.
32
House
No. 1
Window
Menu Locate
P1 P2
--- ACCESS CODE ---
Access code
Choose/Change
Delete
Enter Back
P1 P2
- ACCESS CODE -
Enter code
1
* * *
Enter Back
P1 P2
- ACCESS CODE -
Confirm code
1 2 3 4
Save Back
P1 P2

Keypad lock

The keypad can be locked so that products can-
not be operated without unlocking the keypad.
The stop key can still be used.
1
Press "Menu".
2
Press to highlight "Keypad lock".
Press "Enter" to confirm your choice.
3
Press to highlight "Enable".
Press "Enter" to confirm your choice.
The keypad lock is immediately activated.
Unlocking keypad if the keypad has been
locked:
Message as shown.
Press "Menu". Press "Locate".
The keypad has temporarily been unlocked.
The keypad will automatically be locked again
10 seconds after it has been used.
Note: The keypad lock can be deactivated by
choosing "Disable" in item 3.
House
No. 1
Window
Menu Locate
P1 P2
--- MENU ---
Keypad lock
Timer
Settings
Enter Back
P1 P2
--- KEYPAD LOCK ---
Enable
Disable
Enter Back
P1
P2
--- KEYPAD LOCK ---
Press Menu and
then Locate
Menu Locate
P1 P2
33