Recording A Program P1/P2 - Velux GGL INTEGRA Directions For Use Manual

Recording a Program P1/P2

The program keys P1 and P2 can be used for
pre-setting a series of operating sequences that
can be activated by a single key pressure.
You can record up to eight programs; four under
each of the program keys P1 and P2. The pro-
grams can contain commands about operating
the products and activating the timer function.
The example shows how to program a window
and a roller shutter to close/run down by pressing
the program key P1 just once.
1
Press "Menu".
2
Scroll through the menus:
Settings User settings
3
Press to highlight "Record Program".
Press "Enter" to confirm your choice.
26
House
No. 1
Window
Menu Locate
Programs P1/P2
--- PROGRAMS P1/P2 ---
Record Program
Delete Program
Enter Back
P1 P2
4
Press "Enter" to start recording.
5
The display shows the latest operated product.
Icon indicates that the recording is in progress.
1. Locate the window and close it (see sec-
tions Locating and operating a product and
Choosing positions and luminous intensity).
IMPORTANT! Choose a position by pressing
and holding key until the desired position
has been reached.
Do not use the stop key
2. Locate the roller shutter and roll it down.
3. Press "P1" when the roller shutter has rolled
P1
down.
6
The display asks whether to save the new program.
Press "Yes" to save the new program.
-- RECORD PROGRAM --
Start recording by
pressing Enter.
Stop recording by
pressing P1 or P2
Enter
.
House
No. 1
Window
Menu
P1
--- PROGRAM (P1) ---
Save new
Program
Yes
Back
Locate
P2
No
27