Table Of Contents - VDO Cyclecomputing Z1 Instruction Manual

INSTRUCTION MANUAL

TABLE OF CONTENTS

1.1. GENERAL
1.2. IMPORTANT INSTRUCTIONS FOR THE DIGITAL
WIRELESS SYSTEM
1.3. Control system - operation
1.3.1. Operating mode
1.3.2. Setting mode
1.4. The display
1.5. Extension options & accessories
2. INSTALLATION
2.1. Battery installation
2.1.1. Battery installation - computer and speed/cadence
transmitter
2.2. Installation - holder/computer/transmitter/magnet
2.3. Mounting the computer on the wrist band
3. INITIAL OPERATION
3.1. Initial operation, AC-button
3.2. Language selection
3.3.1. Manual pairing - INITIAL operation wireless system
3.3.2. Initial operation - speed transmitter
3.3.3. Initial operation - cadence transmitter
4. GENERAL SETTINGS
4.1. Setting the language
4.2. Setting time & date
4.3. Setting the alarm, alarm clock
5. BICYCLE FUNCTION SETTINGS
5.1. Measuring and setting wheel size/s
5.2. Changing wheel size
5.3. Setting total kilometers
5.4. Bike check / service interval
6. PERSONAL SETTINGS IMPORTANT NOTE
Ensure that you make the personal settings first so that you can fully
utilize the possibilities offered by the computer.
6.1. Personal settings
7.POWER CALCULATION
7.1. Power calculation in watt
8. ALTITUDE FUNCTION SETTINGS
8.1. Setting the home altitude (starting altitude)
8.2. Setting the actual altitude
8.3. Annual uphill altitude difference bike 1 and bike 2
and walk mode
8.4. Annual downhill altitude difference bike 1 and bike 2
and walk mode
9. RESET MODE
9.1. Resetting trip data
9.2. Reset total ride time
9.3. Resetting the total distance meter
9.4. Resetting the Navigator
9.5. Resetting to factory settings (AC button)
5