Using Speed Dialing - UTStarcom PLS7000 Phone Manual

Using Speed Dialing

You can store up to 500 numbers in your phone's speed dial
memory to make contacting friends and family fast and
easy. With this feature, you can dial Speed Dial entries using
one key press for locations 1-9, two key presses for
locations 10-99, or three key presses for locations 100-500.
To use One-Touch Dialing for Speed Dial locations 1-9:
Press and hold the appropriate key for approximately
two seconds. The display confirms that the name or
number has been dialed.
To use Two-Touch Dialing for Speed Dial locations 10-99:
1.
Press the first digit.
2.
Press and hold the second digit for approximately two
seconds. The display confirms that the name or
number has been dialed.
To use Three-Touch Dialing for Speed Dial locations
100-500:
1.
Press the first digit.
2.
Press the second digit.
3.
Press and hold the third digit for approximately two
seconds. The display confirms that the name or
number has been dialed.
Note:
Speed dialing is not available when you are roaming; when you are
roaming off the network available to you, you must always dial using
eleven digits (1 + area code + number).
Section 2A: Your Phone – The Basics 35