Dialing Options; Display Screen - UTStarcom PLS7000 Phone Manual

You can also place calls from your phone by Speed Dialing
numbers from your Phone Book (page 37) and using your
Call History listings (page 82).

Dialing Options

When you enter numbers in standby mode, you will see a
variety of dialing options appear as softkeys on the phone's

display screen.

To initiate an option, press the corresponding softkey
button.
Speed Dial: Enter a number (1-500) to display the entry
contained in the speed dial location you entered
(if applicable). Press
Tip:
To speed dial a phone number from standby mode, press and hold the
speed dial number. If the speed dial number is two digits, enter the first
digit, then press and hold the second digit. (If the speed dial number is
three digits, enter the first and second digits, then press and hold the third
digit.) (This feature will not work when you are roaming off the network
available to you; when roaming you must dial using eleven digits [1 + the
area code + the seven-digit phone number].)
Save: Enter a seven or ten digit number (phone number
and area code) and press Save (
number in your Phone Book. (See "Saving a Phone
Number" on page 31.)
Find: Enter a digit or string of digits and press Option
). Select Find and press Select (
(
Phone Book entries that contain the entered numbers.
(See "Finding a Phone Number" on page 33.)
Section 2A: Your Phone – The Basics
to dial the speed dial number.
) to save the phone
) to display
25