UTStarcom PLS7000 Phone Manual page 18

Handling the Charger
Only use a power source that provides the appropriate
voltage (AC100~240 V) for the charger. An unsuitable
power source can result in damage to the charger,
electric shock or fire.
Do not use the charger if the power supply cord or plug
is damaged or frayed (exposed or broken wires, etc).
This can result in the risk of fire or electric shock.
Do not short circuit the charger connector jack. This
may result in fire or electric shock.
In the event that liquid is spilled into the unit,
immediately unplug the charger from the wall outlet to
prevent fire or electric shock.
To avoid the risk of electric shock, always unplug the
charger from the wall outlet before cleaning.
To avoid damage, do not place heavy objects on
the cord.
To avoid damage and the risk of electric shock, always
grip the power plug when removing the charger from
the wall outlet. Do not pull on the power supply cord.
8 Section 1A: Setting Up Service