Speed Dialing A Phone Number; Receiving An Incoming Call - UTStarcom C1100 User Manual

Basic Operations
initiate a three-party call

2.6 Speed Dialing a Phone Number

If you know the speed dial location of the telephone number (see "Adding
Contact" on page 42 for instructions on assigning a speed dial key) you
want to call,
Press and hold to call the Voicemail number
Press any key -
assigned to corresponding Speed Dial key 2-9
Press and hold any key
assigned to corresponding Speed Dial key 2-9
Press a key -
- to dial the phone number assigned to corresponding
Speed Dial key 10-99

2.7 Receiving an Incoming Call

When you receive an incoming call, the ring tone should play (based on
the Master Volume settings) and repeat as necessary. The screen
displays the Caller ID, and if the Caller ID matches with a contact, then the
contact information is displayed and the appropriate ring tone is played.
The Default ring tone is used if no ring tone is associated with the contact
or if there is no Caller ID match
If Anykey Answer is set to Off (see "Anykey Answer" on page 48),
press to answer an incoming call
If Anykey Answer is set to On, press any key to answer an incoming
call except the Reject soft key, Silence soft key or the
To reject the call, select the Reject soft key
20
then to dial the phone number
- to dial the phone number
then press and hold a second key
key