Alarm - UTStarcom PLS7000 Phone Manual

Alarm

To set an alarm:
1. Press Menu (
2. Select Tools (
3. Select Alarm (
4. To set a new alarm, choose Empty and press Select
(
keys. Press your navigation key to edit the other fields.
5.
Press your navigation key to change the value in each
field. Press Save (
6. To edit an existing alarm, press Edit (
instructions for setting up a new alarm. To delete the
alarm, press Del (
Note:
The phone displays the date and time based on the information from the
digital CDMA network. Therefore, the date and time will not be displayed
while the phone is out of the service area or operates in the analog mode after
the phone is turned on. The clock and schedule alarms will not work if the date
and time are not displayed.
Tip:
While the alarm is ringing, if Snooze (
sound again after 10 minutes.
94
) to access the main menu.
). Edit the date and time by pressing the digit
Section 2H: Using the Phone's Calendar and Tools
).
).
) to save the alarm.
).
) is pressed the alarm will
). Follow