TEXT INPUT METHODS
TEXT INPUT METHODS
NUMERIC MODE [Num]
Numeric mode allows you to add a number to your
entry/message. To select numeric mode from the Editor
screen press
[Abc], then select [Num].
SYMBOL MODE [Symbols]
Symbol mode allows you to add various symbols to
your entry. Whether you are adding an e-mail address
to your phone book or sending an expressive message,
symbols make these entries easier.
To select symbol mode from the Editor screen press
[Abc] then choose [Symbols].
The symbols will appear on the display.
The corresponding key number for that symbol will
appear as well. You can press the key to select the
symbol.
To move to the next screen of symbols press
Page 38 - Chapter 3
SPEED DIAL
Dials a number simply by pressing and holding its
Speed Dial location number. For a 2-digit location
number, press the first number then press and hold
the second number. To store a number in Speed Dial:
1. Press
2. To assign a phone number to a location, select
the location then press
G If a phone number is already assigned to the location,
press
3. The phone book list will be displayed
alphabetically. Select a name then press
4. "Speed Dial # X Edited!" will be displayed.
G If the entry is set to secret, you will be asked for your password.
.
ONE-TOUCH/TWO-TOUCH DIALING
Ideal for frequently dialed numbers, this feature allows
phone book entries to be dialed via the key pad with only
one or two key presses.
ONE-TOUCH/TWO-TOUCH DIALING:
1-9 : Press the corresponding memory number and hold
for more than 1 second.
01-09/10-20 : Press the first digit and second digits of the
G If no phone number is stored in the location entered,
"There is no number" will appear on the screen.
G If the entry is set to secret, you will be asked for your
password.
G To One-Touch voicemail (*86 feature), press "1" or "01".
SPEED DIALING
SPEED DIALING
[MENU]
.
[SET].
[ERASE] then press
to delete it.
memory number short and long
respectively.
[OK].
Chapter 3 - Page 39
Need help?
Do you have a question about the CDM8932 and is the answer not in the manual?
Questions and answers