Dialing From The Contacts List; Using Speed Dialing - UTStarcom PLS-7075 Phone Manual

Dialing From the Contacts List

To dial directly from a Contacts entry:
1.
Select Menu > Contacts > Find Name.
Shortcut:
Press
2.
Highlight the entry you want to call and press
dial the entry's default phone number.
– o r –
To dial another number from the entry, highlight the
name and press
you wish to call and press

Using Speed Dialing

You can store up to 99 numbers in your phone's speed dial
memory to make contacting friends and family as easy as
pressing a button or two. With this feature, you can dial
speed dial entries using one keypress for locations 2-9 or two
keypresses for locations 10-99.
To use One-Touch Dialing for speed dial locations 2-9:
Press and hold the appropriate key for approximately
two seconds. The display confirms that the number has
been dialed when it shows " Calling..." .
To use Two-Touch Dialing for speed dial locations 10-99:
1.
Press the first digit.
2.
Press and hold the second digit for approximately two
seconds. The display confirms that the number has been
dialed when it shows " Calling..." .
Note:
Speed dialing is not available when you are roaming; when you are
roaming off the home network, you must always dial using eleven digits
(1 + area code + number). For more information about Speed Dialing,
see page 86.
28 Section 2A: Your Phone-The Basics
and then select Find Name to list entries.
, and then highlight the number
.
to