MP-20x Telephone Adapter
7
Making VoIP Calls
Users connected to MP-20x can place calls, put calls on hold, transfer calls and manage 3-
way conferences. The following describes how to perform these operations.
7.1
Placing a Call
To place a call:
1.
Pick up the phone.
2.
Make sure that you can hear a dial tone
3.
Dial the remote party's number or pre-configured speed dial number.
7.2
Answering a Waiting Call
To answer a waiting call when 'Flash only' is configured:
1.
When you hear a call waiting tone (during a call), press 'Flash' on the phone; this puts
the active call on hold and switches to the waiting call.
2.
To return to the original call, press Flash again. You can toggle from one party to
another as much as you like by pressing Flash.
To answer a waiting call when 'Flash + digits sequence' is configured:
1.
When you hear the call waiting tone (during a call), press the 'Flash' key on the phone
and then the '1' key; this puts the original call on hold and switches to the waiting call.
2.
To return to the original call, press Flash+1 again. You can toggle from one party to
another as much as you like by pressing Flash+1.
For configuring call waiting, refer to 'Configuring Dialing Parameters' on page 43.
Version 3.0.1
67
7. Making VoIP Calls
July 2010