12.2.2.1.2 Configuring the LAN Interface
Table 12-7: InternetGatewayDevice.LANDevice.i.LANEthernetInterfaceConfig
TR-069/TR-104
Parameter
Enable
MACAddress
MaxBitRate
Status
Table 12-8: InternetGatewayDevice.LANDevice.i.LANHostConfigManagement
TR-069/TR-104
Parameter
AllowedMACAddres
ses
DHCPLeaseTime
DHCPRelay
DHCPServerEnable
DNSServers
DomainName
MP-20x Telephone Adapter
Configuration File
Parameter
device_eic_enable_get/set
device_mac_address_get
device_max_bit_rate_get
device_status_get
Configuration File
Parameter
allowed_mac_addresses_g
et/set
dhcp_lease_time_get/set
dhcp_relay_get/set
lan_host_config_managem
ent_get/set
rg_conf dhcps/enable
dhcps_dns_servers_get/se
t
domain_name_get/set
160
Description
Enables or disables this interface.
The physical address of the interface.
The maximum upstream and downstream
bit rate available for this connection:
"10"
"100"
"1000"
"Auto"
The status of the interface:
"Up"
"NoLink"
"Error"
"Disabled"
Description
Represents a comma-separated list of
hardware addresses that are allowed to
connect to this connection if
MACAddressControlEnabled is 1 for a
given interface.
Specifies the lease time in seconds of
client assigned addresses. A value of -1
indicates an infinite lease.
Determines if the DHCP server performs
the role of a server (0) or a relay (1) on the
LAN interface.
Enables or disables the DHCP server on
the LAN interface.
Comma-separated list of DNS servers
offered to DHCP clients. Support for more
than three DNS Servers is optional.
Sets the domain name for clients on the
LAN interface.
Document #: LTRT-50609
User's Manual