General; Figure 10-16: Connection Summary; Table 10-9: General Settings - AudioCodes MP-20x User Manual

7. Click Next; the screen 'Connection Summary' opens.
8. Select the check box 'Edit the Newly Created Connection' to be routed to the new
connection's configuration screen after clicking Finish.
9. Click Finish to save the settings; the new L2TP VPN connection is added to the
network connections list and is configurable like any other connection.

10.4.1 General

This section displays the connection's general parameters.
Parameter
Schedule By default, the connection is always active. However, you can configure
scheduler rules (via Advanced>Scheduler Rules) in order to define time
segments during which the connection may be active. Once a scheduler rule(s)
is defined, this field changes to a drop-down list, allowing you to choose
between the available rules.
Network Select whether the parameters you are configuring relate to a WAN, LAN or
DMZ connection, by selecting the connection type from the drop-down list.
MTU MTU is the Maximum Transmission Unit. It specifies the largest packet size
permitted for Internet transmission. When set to its default (Automatic), MP-20x
selects the best MTU for your Internet connection. Select 'Automatic by DHCP'
for the DHCP to determine the MTU. If you select 'Manual', it is recommended
to enter a value in the range of 1200 to 1500.
MP-20x Telephone Adapter

Figure 10-16: Connection Summary

Table 10-9: General Settings

120
Description
Document #: LTRT-50609
User's Manual