Figure 11-16: Routing; Figure 11-17: Route Settings - AudioCodes MP-20x User Manual

MP-20x Telephone Adapter
11.1.5.1.3 Changing the Routing Mode and Adding a Static Route
To change the routing mode:
1. (For all VoIP packets needing to be transferred within the VoIP VLAN) Open menu
Network Connections > WAN Ethernet VLAN 100 > Settings; the figure shown
below opens.
2. Configure parameter 'Routing Mode' (NAT or Route). Choose 'Route' and check the
check box 'Default Route' to use the VoIP VLAN.
3. Configure 'Device Metric' to be the lower than the default metric (default = 3).
To add a static route:
1. Under the Routing tab, in the Routing table, click New Route.
2. From the 'Name' drop-down list, choose 'WAN Ethernet'; configure the parameters
Destination, Netmask and Gateway.
Version 3.0.1

Figure 11-16: Routing

Figure 11-17: Route Settings

133
11. VLAN and Bridge Settings
July 2010