Figure 9-10: Configuring Non-Wep Security - AudioCodes MP-20x User Manual

MP-20x Telephone Adapter
a.
b.
•
Non-802.1x WEP: data encryption method utilizing a statically defined key for
wireless clients that do not use 802.1x for authentication, but use WEP for
encryption. You may define up to four keys but use only one at a time.
a.
b.
Note:
Version 3.0.1
Inter Client Privacy: select the check box to prevent communication
between the wireless network clients using the same access point. Clients
will not be able to view and access each other's shared directories.
RADIUS Server: configure the RADIUS Server parameters
Server IP: RADIUS server's IP address.
Server Port: RADIUS server's port.
Shared Secret: your shared secret.

Figure 9-10: Configuring Non-WEP Security

Inter Client Privacy: select the check box to prevent communication
between the wireless network clients using the same access point. Clients
will not be able to view and access each other's shared directories.
WEP Keys table:
Active: select the encryption key to be activated.
Encryption Key: enter the encryption key until the entire field is filled.
The key cannot be shorter than the field's length.
Entry Method: select the character type for the key: ASCII or HEX.
Key Length: select the key length in bits: 40 or 104 bits.
The encryption key must be defined in the wireless Windows client as well.
This is done in the Connection Properties Configuration window (your
encryption key is entered in both the 'Network key' and 'Confirm network key'
fields, as shown in the figure below.
95
9. LAN Wireless Connection
July 2010