Monitoring The Mp-20X Via Snmp - AudioCodes MP-20x User Manual

12.2.3.2 Monitoring the MP-20x via SNMP

SMNP can be used to monitor the status of MP-20x. VoIP-related monitoring is performed
via the proprietary MIB acMP20x. Other parameters are available in the standard MIB-II.
12.2.3.2.1 VoIP Monitoring
The acMp20xStatus section allows the service provider to get the current MP-20x status.
The list below shows the available objects.
acMP20xStatus
acMP20xStatusVoIP
acMP20xLinePhoneState – on-hook / off-hook / ringing
acMP20xLineRegistrationState – not registered / registered /
registration error
number
packets sent
bytes sent
bytes received
lost
percentage
round-trip delay in ms
MP-20x Telephone Adapter
acMP20xStatusVoIPLinesTable
acMP20xLineCallsTable
acMP20xCallOrigine – Incoming / outgoing
acMP20xCallRemoteNumber – Remote phone
acMP20xCallRemoteID – Remote SIP ID
acMP20xCallDuration – Call duration in ms
acMP20xCallType – Voice/Fax/Modem
acMP20xCallEncoder – Tx codec type
acMP20xCallDecoder – Rx codec type
acMP20xCallPacketsSent – Number of RTP
packets sent
acMP20xCallPacketsReceived – Number of RTP
acMP20xCallBytesSent – Number of payload
acMP20xCallBytesReceived – Number of payload
acMP20xCallPacketsLost – Number of packets
acMP20xCallLostPercentage – Packet loss
acMP20xCallJitter – Average call jitter in ms
acMP20xCallRoundTripDelay – Average call
172
User's Manual
Document #: LTRT-50609