MP-20x Telephone Adapter
10.2.2 PPP Tab
The PPT tab displays the PPPoE settings.
To configure the WAN Ethernet - PPPoE properties
In the 'WAN Ethernet Properties' screen, click the PPP tab; the following screen
opens:
Point-to-Point Protocol (PPP) is the most popular method for transporting packets between
the user and the Internet service provider. PPP supports authentication protocols such as
PAP and CHAP, as well as other compression and encryption protocols.
Parameter
Service Name
PPP-on-Demand
Time Between
Reconnect
Attempts
Version 3.0.1
Table 10-4: PPP Configuration Parameter Descriptions
Specify the networking peer's service name, if provided by your ISP.
Use PPP on demand to initiate the point-to-point protocol session only when
packets are actually sent over the Internet.
Specify the duration between PPP reconnected attempts, as provided by your
ISP.
Description
111
10. WAN Settings
July 2010