9.3.1
MAC Filtering
You can filter wireless users according to their MAC address, by either allowing or denying
access.
To define MAC filtering:
1.
In the Wireless tab's screen, from the 'MAC Filtering Mode' drop-down list, select
either 'Allow' or 'Deny'.
2.
In the 'MAC Filtering Table', click New MAC Address; the 'MAC Filtering Settings'
screen appears.
3.
In the 'MAC Address' field, enter the MAC address to be filtered.
4.
Click OK; a MAC address list appears, upon which the selected filtering action
(allow/deny) will be performed.
Figure 9-6: MAC Address Added to MAC Filtering Table
MP-20x Telephone Adapter
Figure 9-5: MAC Filtering Settings Screen
92
User's Manual
Document #: LTRT-50609