Configuring The Mp-20X's Network Connection; Logging In To Mp-20X Web Interface; Figure 3-3: Logging In - AudioCodes MP-20x User Manual

3.2

Configuring the MP-20x's Network Connection

The Web-based management interface of MP-20x allows you to control the device's
system parameters. The interface is accessed through a Web browser. For detailed
information on MP-20x's Web-management interface, refer to 'Using the MP-20x's Web
Interface' on page 33.
3.2.1

Logging in to MP-20x Web Interface

The procedure below describes how to login to MP-20x's embedded Web interface.
To log in:
1. Launch a Web browser on your PC.
2. With your PC connected directly to MP-20x, use URL http://mp20x.home to access the
Web-based management interface; the 'Login' screen appears.
3. In the 'User Name' field, enter your user name.
4. In the 'Password' field, enter your case-sensitive password.
5. Click OK; the 'Quick Setup' screen opens.
Notes:
MP-20x Telephone Adapter

Figure 3-3: Logging In

•
The default user name and password is "admin" (case-sensitive).
However, it is recommended to define a new password after your first
login session (refer to 'Configuring Users' on page 255).
•
If there's inactivity after logging in, a new login becomes necessary after
a lapse of 15 minutes.
24
User's Manual
Document #: LTRT-50609