Timing Setting; Summer Time Change - Vemer Dafne User Manual

If you set a timing in off status, this off status will be maintained until the end of the
timing, will then switched to the operation that preceded the deactivation (automatic
or manual).
If you set a timing, the display shows the symbol .
Attention: the timings can end before their programmed expiration if one of these
actions occur:
- time/date modifi cation (modifi cation of the summer time change included)
- manual modifi cation of the operating mode
- switching of digital input (for battery models only)
- change of the operating logic from winter to summer (or viceversa)
To set a timing, see chapter "Timing setting" on page 26.
- 39 -
Dafne programmable thermostat, user's manual