Vemer Dafne User Manual page 32

If the keylock is active and one key is pressed, the display shows for a few seconds the
writing bL0c
will be unlocked for 30 seconds from the last pressure.
This page shows the total number of hours of the
system operation (relay ON) for the current mode
(indicated by the icons
The hour meter has 4 digits and is resettable by
pressing for a long time the key
appears.
During manual operation the instrument performs as a normal thermostat, adjusting
on the basis of the Tm temperature (manual setpoint), independently from the day and
the time where it is.
The manual operation is signalled with the switch on of the symbol
To move from automatic operation to manual operation:
2. set the desired setpoint with the keys
3. at this point on field
the instrument operates in manual.
If you want to change the setpoint (Tm) press the key
and 3.
To go back to the automatic operation press for a long time the key
about).
or ).
until 0000
. In the field
and
the value of the environment temperature reappears and
- 30 -
Dafne programmable thermostat, user's manual
in the field
and confirm with the key
and repeat the points 2
(3 seconds
.